Variables | |
System Messages | |
Some definitions to define the raw MIDI system messages.
The default implementation of BMidiLocalConsumer::Data() uses these constants to determine which event system message has been passed on. See BMidiLocalProducer::SpraySystemCommon() and BMidiLocalProducer::SpraySystemRealTime() for more details on how and when to use these messages. | |
| const uchar | B_ACTIVE_SENSING = 0xfe |
| const uchar | B_CABLE_MESSAGE = 0xf5 |
| const uchar | B_CONTINUE = 0xfb |
| const uchar | B_MIDI_TIME_CODE = 0xf1 |
| const uchar | B_SONG_POSITION = 0xf2 |
| const uchar | B_SONG_SELECT = 0xf3 |
| const uchar | B_START = 0xfa |
| const uchar | B_STOP = 0xfc |
| const uchar | B_SYS_EX_END = 0xf7 |
| const uchar | B_SYS_EX_START = 0xf0 |
| const uchar | B_SYSTEM_RESET = 0xff |
| const uchar | B_TIMING_CLOCK = 0xf8 |
| const uchar | B_TUNE_REQUEST = 0xf6 |
Controller Numbers | |
Constants that represent specific controller messages.
These constants can be used in BMidiLocalProducer::SprayControlChange() and BMidiLocalConsumer::ControlChange(). These constants represent the MIDI specification. | |
| const uchar | B_ALL_NOTES_OFF = 0x7b |
| const uchar | B_BREATH_CONTROLLER = 0x02 |
| const uchar | B_CELESTE_DEPTH = 0x5e |
| const uchar | B_CHORUS_DEPTH = 0x5d |
| const uchar | B_DATA_DECREMENT = 0x61 |
| const uchar | B_DATA_ENTRY = 0x06 |
| const uchar | B_DATA_INCREMENT = 0x60 |
| const uchar | B_EFFECTS_DEPTH = 0x5b |
| const uchar | B_EXPRESSION_CTRL = 0x0b |
| const uchar | B_FOOT_CONTROLLER = 0x04 |
| const uchar | B_GENERAL_CTRL_1 = 0x10 |
| const uchar | B_GENERAL_CTRL_2 = 0x11 |
| const uchar | B_GENERAL_CTRL_3 = 0x12 |
| const uchar | B_GENERAL_CTRL_4 = 0x13 |
| const uchar | B_GENERAL_CTRL_5 = 0x50 |
| const uchar | B_GENERAL_CTRL_6 = 0x51 |
| const uchar | B_GENERAL_CTRL_7 = 0x52 |
| const uchar | B_GENERAL_CTRL_8 = 0x53 |
| const uchar | B_HOLD_2 = 0x45 |
| const uchar | B_LOCAL_CONTROL = 0x7a |
| const uchar | B_MAIN_VOLUME = 0x07 |
| const uchar | B_MIDI_BALANCE = 0x08 |
| const uchar | B_MODULATION = 0x01 |
| const uchar | B_MONO_MODE_ON = 0x7e |
| const uchar | B_OMNI_MODE_OFF = 0x7c |
| const uchar | B_OMNI_MODE_ON = 0x7d |
| const uchar | B_PAN = 0x0a |
| const uchar | B_PHASER_DEPTH = 0x5f |
| const uchar | B_POLY_MODE_ON = 0x7f |
| const uchar | B_PORTAMENTO = 0x41 |
| const uchar | B_PORTAMENTO_TIME = 0x05 |
| const uchar | B_RESET_ALL_CONTROLLERS = 0x79 |
| const uchar | B_SOFT_PEDAL = 0x43 |
| const uchar | B_SOSTENUTO = 0x42 |
| const uchar | B_SUSTAIN_PEDAL = 0x40 |
| const uchar | B_TEMPO_CHANGE = 0x51 |
| const uchar | B_TREMOLO_DEPTH = 0x5c |
Channel Message Masks | |
Some definitions to define the raw MIDI events.
The default implementation of BMidiLocalConsumer::Data() uses these constants to determine which event has been passed on. If you override that method, you may use the constants yourself. | |
| const uchar | B_CHANNEL_PRESSURE = 0xd0 |
| const uchar | B_CONTROL_CHANGE = 0xb0 |
| const uchar | B_KEY_PRESSURE = 0xa0 |
| const uchar | B_NOTE_OFF = 0x80 |
| const uchar | B_NOTE_ON = 0x90 |
| const uchar | B_PITCH_BEND = 0xe0 |
| const uchar | B_PROGRAM_CHANGE = 0xc0 |